You are here : Home > Fingerprints under the microscope

News

Micro and nanosystems

Fingerprints under the microscope


​A new fingerprint analysis technology based on piezoelectric nanowires was developed in research conducted under the EU PiezoMAT project. The advance will pave the way for the development of sensors with resolutions in excess of 500 dpi.

Published on 16 January 2018

The fingerprint sensor developed under the EU PiezoMAT project has set a new record. The eight-partner project consortium, which included CEA Tech institute Leti, developed a device that achieved resolutions of more than 1,000 dpi—better than what is required by the FBI and two times the minimum requirement in the project specifications.

The sensor is made up of bundles of ZnO nanowires, each of which forms a pixel connected at the top and bottom of each bundle. The ZnO nanowires have piezoelectric properties; they can produce an electric current and return to their original shape after compression or flexion. In other words, when a finger is placed on the sensor, local deformation of the nanowire network generates an electric potential whose amplitude is proportionate to the nanowires' displacement. This is how the sensor distinguishes the pores and ridge edges of a fingerprint.

Leti's researchers had to overcome several challenges to achieve this advance. First, they obtained an array of Ga-doped ZnO contacts on a silicon chip with a high pattern density. The chip was designed and fabricated on a 200 mm wafer in a cleanroom. A 250-pixel prototype was tested by IDEMIA.

Top page

Top page